|
Laptop Skin
Keypad Skin
LCD Skin
Privacy LCD Guard
Laptop Skin
How to trim and install your laptop skin:
|
1. |
 |
Ensure your laptop surface
is clean and dry, then measure the
size of your laptop cover.
|
|
2. |
 |
Draw
reference lines on the back of the
laptop skin based on your measurement.
It's advisable to leave a
5mm gap on each side if your
laptop has rounded edges. Default
outlines are already printed there for
your convenience. |
|
3. |
 |
Trim the
laptop skin following your reference
lines carefully. |
|
4. |
 |
Position
skin on laptop as desired and stick it
on carefully. It's easier to start from
a corner or one side of your laptop
skin. |
|
5. |
 |
Remove the
rest of the backing and apply the skin
onto your laptop cover, removing any air
bubbles with your fingers as you go. You
can also use the smooth edge of any ATM
or credit card for this purpose. |
How to maintain
your laptop skin:
SkinWeaver laptop
skin is easy to remove and reapply, leaving no
marks upon removal. For maximum reusability,
avoid touching the sticky side during
application of your laptop skin. Avoid direct
contact with harsh chemicals or cleaning agents.
To clean, gently wipe with damp cloth.
We suggest you do
not throw away the original backing, in case you
feel like a changing to a new skin. Simply paste
it back onto the backing paper to keep. It will
be as good as new even after a long term, ready
for reuse whenever you like!
[ back to top ]
Keypad Skin
How to
apply your keypad skin:
|
1. |
|
Thoroughly clean your
keyboard surface using a slightly damp
cloth. |
|
2. |
|
Peel off the keypad
skin from its backing paper. |
|
3. |
 |
Place the keypad skin
over your keypad. |
That's all, and your keypad will be happily
protected!
How to
maintain your keypad skin:
SkinWeaver keypad skin is easy to remove
and reapply, so you can clean it as often as you
like. Simply rinse with warm water and let it
dry before reapplication.
[ back to top ]
LCD Skin
How to trim and install your LCD skin:
|
1. |
|
Clean and
dry your LCD surface.
|
|
2. |
|
Peel off
Mask 1 from the LCD skin. |
|
3. |
|
Apply the
LCD skin onto your LCD screen carefully, using an ATM or Credit
Card to remove air bubbles if necessary. |
|
4. |
|
Peel off
Mask 2 from the LCD skin after it
is completely applied onto the screen. |
Please note, if the size of the LCD skin does
not fit to your screen size, it can be easily
trimmed with a scissor. The remaining can be
re-used on hand phone screens or other LCD
screens.
How to maintain
your LCD skin:
SkinWeaver LCD
skin is easy to remove, leaving no
marks upon removal. Avoid touching the sticky side during
application of your LCD skin. Avoid direct
contact with harsh chemicals or cleaning agents.
To clean, gently wipe with damp cloth.
[ back to top ]
Privacy LCD guard
How to trim and install your privacy LCD guard:
|
1. |
|
Clean and
dry your LCD surface. |
|
2. |
|
Position the privacy LCD guard onto your LCD surface. |
|
3. |
|
Install the plastic position holders using the double-sided stickers provided, on the four corners of the LCD frame to hold the privacy LCD guard properly. |
|
4. |
|
That's it! Your privacy is
now protected! |
Please note that if the size of the privacy LCD guard does not fit to your screen size, it can be easily trimmed with a pair of scissors.
How to maintain
your privacy LCD guard:
SkinWeaver privacy LCD guard is easy to remove, leaving no marks upon removal. Avoid direct contact with harsh chemicals or cleaning agents. To clean, gently wipe with damp cloth.
[ back to top ]
|
